XA 60.5 & X2.5

Beskrivning

* Säljes för kunds räkning. Är du intresserad så meddela oss, maila eller ring så skickar vi en faktura. Den kan såklart köpas på plats direkt i butiken En makalös förstärkakombination från Amerikanska Pass Labs. Monoblocken XA 60.5 och det fjärrstyda försteget X2.5. Givetvis i utmärkt skick komplett med lådor och fjärr. Stereophile avslutar sin recension med: "Summing Up I don't have much to say about the Pass Labs XA60.5 other than this: It is the best-sounding amplifier I have ever used. It's not perfect—I'd like my speakers' low frequencies controlled by a slightly tighter fist—but the XA60.5's magic midrange and sweet, detailed highs more than compensate, and are wholly addictive. " Pass Labs XA 60.5 Description: Solid-state monoblock power amplifier. Inputs: 1 single-ended (RCA), 1 balanced (XLR). Outputs: 2 pairs binding posts. Rated power output (1kHz at 1% THD+N): 60W into 8 ohms (17.8dBW), 120W into 4 ohms (17.8dBW). Voltage gain: 26dB. Frequency range: 1.5Hz–100kHz. Output noise: 200µV. Input common-mode rejection ratio: 60dB. Input impedance: 30k ohms (balanced), 20k ohms (unbalanced). Input sensitivity: 1.1V for full output. Damping factor: 150, equivalent to output impedance of 0.05 ohm. Operating temperature: 127°F (53°C). Power consumption at idle: 200W. Dimensions: 19" (483mm) W by 7" (178mm) H by 19.2" (488mm) D. Weight: 62 lbs (28kg) net, 75 lbs (34kg) shipping. ------------- Pass Labs X2.5 Gain: Selectable 4 dB or 14 dB balanced output, selectable 4 dB or 14 dB single-ended output Frequency Response: -3 dB @ 2 Hz, -3dB @ 100kHz Distortion: < .1 % THD typically .003% @ 2 volts @ 1kHz Max Output: 10 volts RMS balanced out, 7 volts RMS Unbalanced out Noise: Noise floor < -125dBV, 20-20kHz Amplifier Turn On: 12 Volts DC mA continuous. Dimensions: 17″W X 3.5″H X 11.5″ D Power Consumption: 35 watts

Beskrivningen är skriven av säljaren.

Produktinformation

Alla Pass Labs XA 60.5 & X2.5 på Hifimarknaden